+86-028-85255257
FLAF-1300-02X series of transceiver modules are the perfect solution for Low-speed communication networks. FLAF-1300-02X Small Form Factor (SFF) transceivers comply with the 2×5 standard package defined by the Small Form Factor Multi-Sourcing Agreement (MSA). The transceivers are RoHS compliant and lead-free per Directive 2002/95/EC5. FLAF-1300-02X SFF transceivers support data rates up to 10Mbps.FLAF-1300-02X SFF module has been designed to provide good immunity to RF electromagnetic fields and excellent EMC/EMI performance.
Standard : 0 to +70°C
Industrial : -40 to +85°C
Operating of SFF beyond the Absolute Conditions Listed in Table 1 will degrade or damage the products. It’s not implied that the products would function above the recommended operating environment, it’s possible to reduce the reliability and lifetime of device if Recommended Operating Environment is exceeded (Refer to table 2)
Table 1-- Absolute Maximum Conditions
Parameter |
Symbol |
Min |
Max |
Units |
Storage Temperature |
TST |
-40 |
+85 |
℃ |
Relative Humidity |
RH |
5 |
95 |
% |
Supply Voltage |
VCC |
0 |
+3.8 |
V |
Table 2-- Recommended Operating Environment
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
|
Supply Voltage |
VCC |
+3.1 |
+3.3 |
+3.5 |
V |
|
Supply Current |
ITX+IRX |
- |
100 |
150 |
mA |
|
Operating Temperature |
Commerce level |
TOP |
0 |
- |
+70 |
℃ |
Data Rate |
B |
- |
- |
10 |
Mbits/s |
Table 3 FTAF-1503-120X-9105M Transceiver Optical and Electrical Characteristics
(Ambient Operating Temperature Ta=0°C to +70°C, VCC= 3.1V to 3.5V)
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
Transmitter |
|||||
Data rate |
B |
- |
- |
10 |
Mb/s |
Output Center Wavelength |
λC |
1260 |
1310 |
1360 |
nm |
Output Spectral width (RMS) |
λ |
- |
3.0 |
nm |
|
Average Optical Output Power |
Po |
-10 |
- |
-3 |
dBm |
Extinction Ratio |
EXT |
10 |
- |
- |
dB |
Optic Output Eye: Compliant with Bellcore TR-NWT-000253 and ITU recommendation G.957 |
|||||
Receiver |
|||||
Receiver Sensitivity |
S |
- |
- |
-16 |
dBm |
Maximum Input Power |
PMAX |
-3 |
- |
- |
dBm |
Operation Center Wavelength |
λC |
1100 |
1600 |
nm |
|
LOSS Detect Deassert Level |
LOSD |
- |
- |
-16 |
dBm |
LOSS Detect Assert Level |
LOSA |
-25 |
- |
- |
dBm |
Signal Detect Hysteresis |
PH |
0.5 |
- |
4.0 |
dB |
Table 4 (Ambient Operating Temperature Ta=25°C, V CC = 3.3V)
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
Supply Voltage |
VCC |
3.1 |
3.3 |
3.5 |
V |
Transmitter |
|||||
TX_DISABLE Input High |
VHI |
2.0 |
- |
- |
V |
TX_DISABLE Input Low |
VIL |
- |
- |
0.8 |
V |
TX_FAULT Output Low |
- |
- |
- |
0.4 |
V |
Receiver |
|||||
Output Resistance |
ROUT |
42 |
50 |
58 |
W |
LOS Output Low Voltage |
VOL |
2.0 |
- |
- |
V |
LOS Output High Voltage |
VOH |
- |
- |
0.8 |
V |
Table 5-SFF to host connector pin assignment
Pin # |
Pin Name |
Description |
1 |
VEER |
Receiver Ground |
2 |
VCCR |
Receiver Power Supply |
3 |
SD |
Signal Detect. Logic 1 indicates normal operation or Logic 0 indicates normal operation. |
4 |
NC |
NC |
5 |
RD+ |
Receiver Data Out. AC Coupled |
6 |
VCCT |
Transmitter Power Supply |
7 |
VEET |
Transmitter Ground |
8 |
TDIS |
Transmitter Disable |
9 |
TD+ |
Transmitter Data in. AC Coupled. |
10 |
NC |
NC |
Ordering information
Part number |
Operating Case temperature |
FLAF-1300-02 |
SFF, DC 0~10M, MMF, 1310(FP) 2KM, 0 to +70°C |
FLAF-1300-02I |
SFF, DC 0~10M, MM F, 1310(FP) 2KM, -40 to +85°C |
Note: Specifications subject to change without notice.