+86-028-85255257
偏振分束器(PBS/PBC)用于將兩束正交偏振光耦合入一根光纖中或?qū)⒑痪€偏振光的單一輸出分別耦合到兩個光纖輸出中,也可以反向應用將兩束從保偏光纖分支輸入的正交偏振光束耦合到一根單模輸出光纖中,可用于泵浦激光器的功率合束,提高光纖激光器的消光比。
產品特點
● 低插入損耗
● 高消光比
● 高回波損耗
● 高穩定性和可靠性
應用領域
● 光纖激光器
● 光纖放大器
● 相干通信
● 光纖陀螺
產品指標
參數 |
單位 |
數值 |
中心波長 |
nm |
1310 |
工作帶寬 |
nm |
±40 |
典型插入損耗 |
dB |
0.4 |
最大損耗 |
dB |
0.6 |
最小消光比 |
dB |
22 |
方向性 |
dB |
50 |
回波損耗 |
dB |
50 |
承受功率 CW |
mW |
300 |
光纖類型 |
- |
PM Panda fiber for Ports 1 & 2, SMF-28 or PM Panda fiber for Port 3 |
光纖長度 |
m |
1或其它 |
連接頭類型 |
- |
FC/APC或者其它 |
最大拉力 |
N |
5 |
封裝尺寸 |
mm |
Φ5.5XL35 |
工作溫度 |
℃ |
0 ~ + 70 |
儲存溫度 |
℃ |
-40 ~ +85 |
* 測溫環境在23° C
**如果增加連接頭,插入損耗增加0.3dB,回?fù)p降低5dB,對于保偏產品消光比降低2dB。
選型信息
FT-X5-PBS/C |
① |
② |
③ |
④ |
⑤ |
⑥ |
⑦ |
工作波長 |
承受功率 |
光纖類型 Port1&2 |
光纖類型 Port3 |
尾纖長度 |
尾套類型 |
連接頭類型 |
|
1310-1310nm S-其它
|
00-300mW S-其它 |
1-PM1300 2-其它 |
1-SMF-28e 2-PM1300慢軸 45° 對準 Port 1 3-PM1300慢軸對準Port 1 |
08-0.8m 10-1.0m 15-1.5m S-其它 |
B-250um 裸纖 L-900um松套管 S-其它 |
NN-None FU-FC/PC FA-FC/APC SU-SC/PC S-其它 |
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.