400G 10km OSFP Optical Transceiver

Product Description
F-tone Networks’s OSFP transceiver module is designed for use in 400 Gigabit Ethernet links over 10km single mode fiber with FEC. The module has 8 independent electrical input/output channels operating at 53.125Gbps per channel. The integrated GearBox in module converts the 8 channels of 53.125Gbps (PAM4) electrical input data to 4 channels of parallel optical signals, each capable of 106.25Gbps (PAM4) operation for an aggregate data rate of 400Gbp/s. The optical side of transceiver consists of 4 independent channels on CWDM4 1271/1291/1311/1331nm center wavelength. The electrical interface of the module is compliant with the 400GAUI-8 interface as defined by IEEE 802.3bs, and compliant with OSFP MSA.

Features
● Supports 425Gbps
● Single 3.3V Power Supply
● Up to 10km over SMF
● Duplex connector
● OSFP MSA compliant
● PIN and TIA array on the receiver side
● Power dissipation < 10W
● Case temperature range: 0°C to 70°C(commercial)
● I2C interface with integrated Digital Diagnostic Monitoring
● Safety Certification: TUV/UL/FDA
● RoHS Compliant

Applications
● 4 x 100G-LR4 applications
● Data center

本產品為FT-AM系列，僅展示部分參數(shù)，如有需要，請聯(lián)系我們。
注：本產品有全國產化型號可選
Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.