+86-028-85255257
Description
F-tone Networks offers different equipments to the optical communication industry. Our main products include both optical source and transmitter for converting an electrical signal into an optical signal, followed by passing through optical fiber and multiple kinds of amplifiers for signal modification, and finally optical receivers to recover the signal to electrical signal. The information transmitted can be digital or analogue generated by computers, telephone systems, and cable television companies.
The most commonly-used optical light source is semiconductor devices such as light-emitting diodes (LEDs) and laser diodes. The main difference between LEDs and laser diodes is that LEDs produce incoherent light, while laser diodes produce coherent light. F-tone Networks offers two light sources that are high output power and stable -Superluminscent Diodes (SLDs) and DFB lasers. Superluminscent Diodes (SLDs) are incoherent broadband sources with broad wavelength coverage, but DFB lasers are narrow linewidth light sources with high side mode suppression ratios.
Feathure
Wide spectral range
High output power
Good spectral stability
Compact size
Good performance cost ratio
Two year warranty
Application
Fiber optical sensing
Optical tomography
DWDM component characterization
Optical gyroscope
Specification
Parameter |
Unit |
Specification |
||
Min |
Typ |
Max |
||
Part NO. |
|
FT-93-980-B |
||
Output power1 |
mW |
2 |
- |
3 |
Central wavelength |
nm |
960 |
- |
980 |
spectrum width,(FWHM) |
nm |
30 |
- |
70 |
spectral modulation |
dB |
- |
- |
0.45 |
Spectrun flatness |
dB |
- |
3 |
- |
Output isolation2 |
dB |
30 |
- |
- |
Short-term stability,(15min) |
% |
- |
- |
±0.5 |
Long-term stability,(8hours) |
% |
- |
- |
±1.5 |
Output power Adjustable rang |
% |
0 |
- |
100 |
Adjustable Mode |
|
Coarse/Fitness |
||
Power supply |
VAC |
170 |
220 |
260 |
Power consumption |
W |
- |
- |
5 |
Operation Temperature |
℃ |
0 |
- |
50 |
Storage Temperature |
℃ |
-40 |
- |
85 |
Fiber type3 |
|
SM fiber (PM fiber optional) |
||
Fiber length |
m |
> 1 |
||
Output Connector |
|
FC/APC,Customized |
||
Dimension |
mm |
270(L)×235(W)×105(H) |
Ordering information
FT-93-1064-B-SLD-PW-SP
B:Benchtop
PW:output power,unit:mW.eg:10-10mW,05-5mW
SP:Output isolator 0-without, 1-with
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.