+86-028-85255257
產品簡介
|
FT-PM-CYFL-M是一款基于種子源+光功率放大(MOPA)結構的連續輸出摻鐿光纖激光器。以雙包層保偏摻鐿光纖工作物質,采用高效率泵浦功率耦合技術及長壽命多模泵浦激光器,保證了其優越的工作性能。全保偏光路,線偏振模式激光輸出。提供帶制冷與非制冷兩種規格產品,帶制冷結構工作溫度范圍可達-5℃~+55℃并確保設備在極限溫度條件下的長期可靠運行。非制冷結構縮減了外形尺寸,節省空間,適用于對體積、重量要求嚴格的應用場合。 |
產品特點
|
|
種子源+光功率放大器結構 高功率輸出(典型值 5W) 全保偏光纖光路 線偏振光輸出 光功率可調(10-100%) 可選激光輻射波長(1050-1100nm) 優異的光束質量(M 2< 1.5) 可選光纖連接器或準直器輸出 非制冷結構與帶制冷結構可選 |
|
應用領域
|
|
傳感技術(Sensing) 激光加工(Processing) 三維激光掃描(3D scanning) 超連續譜(SC)發生 激光雷達(LIDAR) 科學研究(R&D) |
技術指標
性能參數 | 最小值 | 典型值 | 最大值 | 備注 |
中心波長(nm) | 1050 | 1064 | 1100 | |
峰值光功率(KW) | 1 | 5 | @ 50ns / 10KHz | |
平均輸出功率(W) | 0.5 | 5 | ||
偏振消光比(dB) | 15 | |||
脈沖寬度(ns) | 30 | 100 | ||
脈沖重復頻率(KHz) | 1 | 100 | ||
輸出光隔離度(dB) | 30 | |||
光功率不穩定性(%) | 5% | |||
功率調諧范圍(%) | 10 | 100 | ||
光束質量(M²) | 1.5 | |||
輸出方式 | FC 連接器 / 光準直器 | 準直器規格可選 | ||
輸出光纖(纜)長度 | 900um外徑PVC套管(1米)或定制 | |||
光纖(纜)最小彎曲半徑 | 30mm |
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.