- Contact Us：
-
+86-028-85255257
- sales@f-tone.com
標準光模塊
標準協議光模塊
- 全國產化光模塊
- 25G~400G高速光模塊
- 200km超長距光模塊
- 5G移動通信光模塊
- SFP光模塊
- CWDM SFP
- DWDM SFP
- BIDI-SFP
- SGMII SFP
- Video SFP光模塊
- Copper SFP
- 低功耗SFP
- SFP+光模塊
- CWDM SFP+
- DWDM SFP+
- BIDI SFP+
- Tunable SFP+
- 16GFC SFP+
- 25GE SFP+
- 32GFC SFP+
- SFP28光模塊
- SFP56光模塊
- SFP-DD光模塊
- QSFP光模塊
- QSFP+ 光模塊
- QSFP28光模塊
- QSFP56光模塊
- QSFP112 400G光模塊
- QSFP224光模塊
- QSFP-DD光模塊
- QSFP-DD800光模塊
- OSFP 400Gbps
- OSFP 800G光模塊
- OSFP 1.6T光模塊
- HSFP 1.6T~12.8T光模塊
- XFP光模塊
- CWDM XFP
- DWDM XFP
- BIDI XFP
- 1x9光模塊
- CSFP光模塊
- CSFP+10G光模塊
- CXP光模塊
- CFP光模塊
- CFP2光模塊
- CFP4光模塊
- CFP8 400Gbps
- CDFP 400Gbps
- MicroQSFP光模塊
- DSFP光模塊
- FT-61光模塊
- OLT光模塊
- ONU光模塊
- PLCC光模塊
- RJ光模塊
- SFF光模塊
- SNAP12光模塊
- USOT光模塊
- X2光模塊
- Xenpak光模塊
- 光電編碼器模塊
- 光模塊測試板
- 光模塊籠子座子
- DAC 高速線纜
- 光纖滑環|光電滑環
- 光纜車
- 軍品級DIN光模塊
- 塑料光纖模塊
- 替換安華高工業電力光模塊
- 兼容國產化替換安華高光耦
- 射頻光模塊
- 微型多路光模塊
- 特種光模塊
- 特種光纖連接器
- 特種光電連接器
- USB光纖延長線
- HDMI
- 特種電連接器
- 特種光纖光纜
- 光藕
- SMA測試線纜
- OSA
- PON BOSA
- Pigtailed PD
- RFoG BOSA
- TO-CAN
- 光纖溫度傳感器
- 光纖應變傳感器
- 光纖加速度傳感器
- 光線壓力傳感器
- 光纖位移傳感器
- 光纖應力傳感器
- 光纖傳感分析儀
- 光纖分布式測溫主機
- 光纖布里淵信號解調儀
- 分布式光纖聲振信號解調儀
- Camera Link
技術支持
兼容協議光模塊
- 華為光模塊
- 思科光模塊
- 華三光模塊
- 中航光電光模塊
- 中興光模塊
- 銳捷光模塊
- 惠普光模塊
- 神州數碼光模塊
- Juniper光模塊
- Extreme光模塊
- Brocade光模塊
- D-Link光模塊
- 赫思曼光模塊
- 阿爾卡特朗訊光模塊
- Allied Telesis光模塊
- Foundry光模塊
- Force10光模塊
- Blade光模塊
- Linksys光模塊
- Marconi光模塊
- 博達光模塊
- 網件光模塊
- Nortel光模塊
- Moxa光模塊
- ?？低旽IKVISION光模塊
- McAfee光模塊
- SMC智邦光模塊
- 安華高Avago光模塊
- 飛通光模塊
- Finisar光模塊
- yellobrik SDI光模塊
- 羅克韋爾AB光模塊
- 羅杰康光模塊
- 研華Advantech光模塊
其它種類光器件
- 全國產化光器件
- 光纖陣列系列
- 高速模塊微連接
- 相干通訊光連接
- 硅光子器件光鏈接
- Bio-Medical Equipment
- Components for Fiber Laser
- Components for Fiber sensing
- Components for Optical Network
- EDFA光纖放大器
- 光纖傳感器
- High power Component
- Hybrid for EDFA
- Test Equipment & Others
- Test Equipment & Others
- 保偏光器件
- 光分路器
- 光開關
- 探測器
- 光功率計
- 全光纖相位拉伸器
- 光纖準直器
- 光衰減器系列
- 光偏振控制器
- 光源
- 光環行器Circulator
- 光纖延遲線
- 色散補償模塊
- 光纖放大器
- 無源傳輸轉換器
- 光纖激光器
- 光調制器
- 光電探測器
- 光纖偏振
- 光纖濾波器
- 同軸激光器
- 同軸電纜
- 光纖法蘭適配器
- 光纖跳線&尾纖
- SMA-特殊纖芯系列
- 特殊接頭系列
- 鎧裝系列
- 光耦合器Coupler
- 皮纖跳線系列
- 大芯數系列
- 回路跳線系列
- 保偏光纖系列
- 光通信組件
- 光隔離器isolator
- 其它光器件
- 可調濾波器
- 可調衰減器
- 拉錐耦合器
- 無源光器件
- 法拉第旋轉鏡
- 波分復用器
- 濾波器
- 蝶形激光器
- 光耦合器&分路器
- 光纖環形器&法拉第旋轉鏡
- 光纖隔離器&波分復用器
- 光纖分束器&合束器（PBS/PBC）
- 光纖光柵
- 高速線纜
Tunable DWDM XFP transceiver
Specifications
- 產品型號: TXFP-ER/ZR-X
- 兼容品牌: 全系列
- 封裝類型: XFP
- 傳輸速率: 10G
- 傳輸距離: 40KM~120KM可選
- 發射波長: Tunable DWDM
- 接收波長: Tunable DWDM
- 工作溫度: 商業級0℃～+70℃/工業級-40℃～+85℃ 可選
- 數字診斷: 帶DDM
- 接收靈敏度: 40KM~120KM可選
- 接收靈敏度: 40KM~120KM可選
Description
Tunable DWDM XFP transceiver
Tunable XFP transceiver 中文名稱 為 可調諧 XFP 光模塊, 是一種可熱插拔的，獨立于通信協議的光學收發器，其特點是工作波長可以調諧的，用于10G bps的SONET/SDH，光纖通道，gigabit Ethernet，10 gigabit Ethernet和其他應用中。
F-tone 10G XFP Tunable實現量產。作為10G產品線的重要組成部分，DWDM光收發模塊被廣泛應用于主干網和城域網傳輸，相對于TDM光收發模塊，DWDM能最大限度的利用光纖資源，以100GHz或50GHz波長間隔，覆蓋40km到120km，實現多達100個通道的信號傳輸。
10G XFP Tunable的量產，是對F-tone已經實現量產的10G SFP+和XFP系列DWDM固定波長產品的重要補充。Tunable可以節省多達100個通道的備貨和生產工作量及資金占用，隨著Tunable產品的供應和成本改善，預計Tunable產品年化增長率超過20%。
F-tone XFP Tunable產品功耗低，性能優異，性價比高，具有很強的市場競爭力。F-tone XFP Tunable產品支持80個標準波長可調，其波長范圍覆蓋了整個C波段，頻率間隔為50GHz。具有自動波長鎖定功能，波長精度高達0.02nm，傳輸距離達80km，支持速率從9.95到11.35Gbps。
F-tone XFP Tunable產品功耗低，性能優異，性價比高，具有很強的市場競爭力。F-tone XFP Tunable產品支持80個標準波長可調，其波長范圍覆蓋了整個C波段，頻率間隔為50GHz。具有自動波長鎖定功能，波長精度高達0.02nm，傳輸距離達80km，支持速率從9.95到11.35Gbps。
Features
- Supports 9.95Gb/s to 11.3Gb/s transmission
- Client side and Line side loopback functions
- XFP MSA compliant form factor connector
- XFI electrical interface compliant
- Hot-pluggable XFP footprint
- 80km MZM Tunable TOSA
- Supports 50GHz ITU-based channel spacing (C-Band) with a wavelength locker
- Power Dissipation < 3.5W
- I2C interface for diagnostic monitoring
- RoHS 6 Compliant
- SONET (OC-192) / SDH (STM-64)
- 10GBASE-ZR (10.3125Gbps)/ZW (9.953Gbps)
- Metro Network Transport
- Inter Data Center Connection
General Description
The TXFP-ZR-Xseries optical transceiver is a high performance and cost effective XFP transceiver modules designed for 10G SDH/SONET, 10G Ethernet DWDM fiber optic transmission applications, designed to support the full range of C-band ITU-T wavelengths data rates from 9.95Gbps to 11.3Gbs and distances up to 80km.This transceiver contains both transmit and receive sections. An MZM, (C-band tunable laser with a wavelength locker) a laser driver and the supporting circuits constitute the transmit path while an APD ROSA, a post amplifier and the supporting circuits form the receive section. A microcontroller handles the communications between the module and the host board as well as the control and monitoring functions for both transmit and receive sections. A Clock and Data Recovery circuit (CDR) functions for both transmit and receive.The transceiver module is fully compliant with the XFP MSA standard and can be hot-plugged into the 30-pin XFP connector on the host board. By limiting inrush currents, the device will not disturb the operations of the host board. The high-speed electrical interface is fully compliant with the XFI standard, providing transmission paths for the 10G signals.
The TXFP-ZR-Xseries optical transceiver is a high performance and cost effective XFP transceiver modules designed for 10G SDH/SONET, 10G Ethernet DWDM fiber optic transmission applications, designed to support the full range of C-band ITU-T wavelengths data rates from 9.95Gbps to 11.3Gbs and distances up to 80km.This transceiver contains both transmit and receive sections. An MZM, (C-band tunable laser with a wavelength locker) a laser driver and the supporting circuits constitute the transmit path while an APD ROSA, a post amplifier and the supporting circuits form the receive section. A microcontroller handles the communications between the module and the host board as well as the control and monitoring functions for both transmit and receive sections. A Clock and Data Recovery circuit (CDR) functions for both transmit and receive.The transceiver module is fully compliant with the XFP MSA standard and can be hot-plugged into the 30-pin XFP connector on the host board. By limiting inrush currents, the device will not disturb the operations of the host board. The high-speed electrical interface is fully compliant with the XFI standard, providing transmission paths for the 10G signals.
Functional Description
The TXFP-ZR-X series optical transceiver contains a duplex LC connector for the optical interface and a 30-pin connector for the electrical interface. Figure 2 “ Transceiver Block Diagram ” shows the functional block diagram of TXFP-ZR-X series optical transceiver.
Transmitter Operation The transceiver module receives 10Gb/s electrical data and convert it to an optical signal. The transmitter contains a Clock Data Recovery (CDR) circuit that reduces the jitter of received signal and reshapes the electrical signal before the electrical to optical (E-O) conversion. The optical output power is maintained constant by an automatic power control (APC) circuit. The transmitter output can be turned off by TX disable signal at TX_DIS pin. When TX_DIS is asserted high, the transmitter is turned off.Receiver Operation The received optical signal is converted to serial electrical data signal. The optical receiver contains a CDR circuit that reshapes and retimes an electrical signal before sending out to the XFI channel (i.e. XFP connector and high speed signal traces). The RX_LOS signal indicates insufficient optical power for reliable signal reception at the receiver.Management Interface A 2-wire interface (SCL, SDA) is used for serial ID, digital diagnostics and other control/monitor functions. The address of XFP transceiver is 1010000x.MOD_DESEL
signal can be used to support multiple XFP modules on the same 2-wire interface bus. Management interface is compliant with XFP MSA.
訂貨信息/Ordering information :
| Part No. | Description |
| TXFP-ER | Tunable DWDM XFP transceiver, 40KM,0°C to 70°C |
| TXFP-ERI | Tunable DWDM XFP transceiver, 40KM, -40°C to 85°C |
| TXFP-ZR | Tunable DWDM XFP transceiver, 80KM,0°C to 70°C |
| TXFP-ZRI | Tunable DWDM XFP transceiver, 80KM, -40°C to 85°C |
Related Products
CWDM XFP 10KM
- Supports 9.95Gb/s to 11.1Gb/s bit rates
- Hot-pluggable XFP footprint
- Maximum link length of 10km with SMF
- 4-Wavelengths Uncooled CWDM DFB laser from1270nm to 1330nm, with Step 20nm
- XFP MSA package with duplex LC connector
- No reference clock required
- Compatible with RoHS
- +3.3V power supply
- Power dissipation <2.5W
- Built-in digital diagnostic functions
- Temperature range 0°C to 70°C(Standard), -40°C to 85°C (Industrial)
80KM CWDM XFP
- Wavelength selectable to ITU-T standards covering CWDM grid wavelengths
- XFP MSA Compliant
- data rate from 9.95 Gbps to 11.3Gbps
- No Reference Clock required
- Cold EML transmitter and APD receiver
- 1470nm~1570nm link length up to 80km (1600ps/nm)
- 1590nm~1610nm link length up to 70km (1400ps/nm)
- Low Power Dissipation 3.5W Maximum
- Operating Case Temperature 0°C to 70°C(Standard), -40°C to 85°C (Industrial)
- Diagnostic Performance Monitoring of module temperature, supply Voltages, laser bias current, transmit optical power, receive optical power
- RoHS compliant and lead free
CWDM XFP 40KM
- Wavelength selectable to ITU-T standards covering CWDM grid wavelengths
- XFP MSA Compliant
- data rate from 9.95 Gbps to 11.3Gbps
- No Reference Clock required
- Cold EML transmitter and PIN receiver
- link length up to 40km (800ps/nm)
- Low Power Dissipation 3.5W Maximum
- Operating Case Temperature 0°C to 70°C(Standard), -40°C to 85°C (Industrial)
- Diagnostic Performance Monitoring of module temperature, supply Voltages, laser bias current, transmit optical power, receive optical power
- RoHS compliant and lead free
DWDM XFP 40KM
- Wavelength selectable to C-band ITU-T grid
- Suitable for use in 100GHz channel spacing DWDM systems
- XFP MSA Compliant
- data rate from 9.95 Gbps to 11.3Gbps
- No Reference Clock required
- Cold Start up Wavelength Compliance
- DWDM-rated EML transmitter and PIN receiver
- link length up to 40km
- Low Power Dissipation 3.5W Maximum
- Operating Case Temperature 0°C to 70°C(Standard), -40°C to 85°C (Industrial)
- Diagnostic Performance Monitoring of module temperature, supply Voltages, laser bias current, transmit optical power, receive optical power
- RoHS compliant and lead free
DWDM XFP 80KM
- Wavelength selectable to C-band ITU-T grid
- Suitable for use in 100GHz channel spacing DWDM systems
- XFP MSA Compliant
- data rate from 9.95 Gbps to 11.1Gbps
- No Reference Clock required
- Cold Start up Wavelength Compliance
- DWDM-rated EML transmitter and APD receiver
- link length up to 80km
- Low Power Dissipation 3.5W Maximum
- Operating Case Temperature 0°C to 70°C(Standard), -40°C to 85°C (Industrial)
- Diagnostic Performance Monitoring of module temperature, supply Voltages, laser bias current, transmit optical power, receive optical power
- RoHS compliant and lead free
DWDM XFP 120KM
- Wavelength selectable to C-band ITU-T grid wavelengths
- Suitable for use in 100GHz channel spacing DWDM systems
- XFP MSA Rev 4.5 Compliant
- Data rate from 9.95Gbps to 11.3Gbps
- Cooled EML and APD receiver
- link length up to 120km (with amplifier)
- Low Power Dissipation 3.5W Maximum
- XFI and lineside loopback Mode Supported
- Operating Case Temperature 0°C to 70°C(Standard), -40°C to 85°C
- Diagnostic Performance Monitoring of module temperature,Supply Voltages, laser bias current, transmit optical power, and receive optical power
- RoHS compliant (lead free)